Engine Parts
Top Fuel Quality Billet 7075T6 Aluminum Rods
When Only the Best is Good Enough!

MM499 - .875" Rod - $110.00
Available in:
4.200"
4.225"
4.275"
MM498 - 1" Rod - $100.00
Available in:

3.875"
4.375"
4.475"

Rod Bearings - $18.00

 

MM73 - .875" Bearing
MM74 - 1" Bearing

MM46 - Hi-Per Rod Bolts - $8.96

 

MM47 - Replacement Rod Bolt Also Available - $5.90

3L - Coil Kit - $94.95

Made for 3 horse flywheels. Comes with adjustable coil bracket- 3 degrees per hole. This is a Snyder Special and won't retard the timing at high RPM's.

3L1 - Bracket Only - $22.00

MM90 - NGK Spark Plug - $7.50
MM35 - Aluminum Flywheel - $144.00

Flywheel Offset Keys

M120 - Complete Set (2-9) - $13.00
M120-__ - Each Separate - $2.00
M115 - Starter Nut - $18.50

Wiseco Pistons
WP1982P140
WP1982P155
WP1982P174
WP1982P194
WP1985P1
WP1985PS WP1986P1
WP1986P2
WP1986P3
WP1986P6
WP1986P8
WP1986PS
$85.00
$85.00
$85.00
$85.00
$75.00
$75.00
$75.00
$75.00
$75.00
$75.00
$75.00
$75.00
MM9313 - 3" JE Piston - $114.95
with Rings, Wrist Pin, and Circlips
MM199 - Wiseco Ring Sets - 18.95

MM88 - Snyder Motorsports
HiPer Wrist Pins - $14.95

.060 or .090 wall thickness

Made in the USA.

MM155 - Piston Circlips - $3.00

Holds the wrist pin in place.

Stainless/ Titanium Valves

MM85 - Stainless Valves - $15.95
MM86 - Titanium Valves - $76.25

MM87 - Brilium Copper
Valve Seats - $19.95
MM150 - Valve Guides - $10.72
Sold as a Pair
MM55 - Comp Cams Dual
Valve Spring Kit - $26.95
MM50 - Lifters - $28.95
100 thousands long pair
MM136 - Stock Briggs &
Stratton Crank - $148.95
MM138A - ARC Cranks - $445.00
.450 or .563 Stroke
MM53 - Cams - $139.00

Honker III - 375 Lift
...
 Great cam for small valve motors.

Honker IV - 400 Lift
Great Bracket Cam. Big Valve - Stroker Cam. Very Consistant.

Honker V - 433 Lift
..
 Radical! For the serious tuner that  can put the power down.

MM555019 - Cam Gear
for Crank - $10.10

MM555049 - Woodruf Key - $3.00
for Cam Gear

Crank Bearings

MM145 - 1" Side Cover Bearing - $8.50
MM140 - 7/8" Block Bearing - $15.20

Crank Seals

FPS70002 - Flywheel Side - $2.74
FPS70003 - Side Cover - $4.80
Engine Tools

MM52 - Valve Spring
Compression Tool - $91.00

The Cadilac of valve spring compression tools. Makes installing valve springs is a breeze with this tool.

Extra Shoe - $11.23

MM52B - Valve Spring
Compression Tool - $29.99

The buget version of the valve spring compression tool.

Comes with 2 different-sized shoes.

MM58 - Dial Indicator with Bracket - $45.99

Check valve lift and duration with ease.

MM58D - Dial Indicator Only - $22.99
MM58B - Bracket Only - $25.95

MM59 - Small Valve Lapper - $6.99

MM59C - Lapping Compound - $15.95
Comes with Corse and Fine Grit.

MM60 - Port Reshaping Kit - $34.99

This 2-part epoxy dries without shrinking and can with stand up to 500 degrees. Best of all alcohol will not break down the epoxy. Kit includes epxoy, gloves, and mixing sticks.

The Super Scraper

The ultimate in scaping power and ease. Solid Carbide-Tip and Double-edged Blade.

M35S - 1.25" Blade - $21.99
M35L - 2.25" Blade - $39.95

MM54 - Comp Cams Degree
Wheel Kit - $29.95

Degree your cam in properly.

MM56 - Spring Pocket Tool - $44.67

Cut your own spring pockets and get the proper installation height.

Crank-Cam Clearencing Tool - $35.95

SMS1 - Original or Blockzilla 2/3
MM57 - Briggs Raptor

To Place an Order Call 219.987.2921
This website created and maintained by McSnyder Designs